Minolta DIMAGE SCAN DUAL II AF-2820U - Manual (Page 95)

Dimâge Scan Dual II 95
COLOR MATCHING
Output color space setting
1. Insert the check mark in the “Color Matching ON” checkbox.
1. Insert the check mark in the “Use ICC profile” checkbox.
2. Click the ICC profile Load button.
• The standard file open dialog of your operating system is displayed.
3. Select the ICC profile according to the monitor being used.
The application may perform the original matching process. If you want to change the
setting, refer to the following sample settings.
And, when the color matching function is used, the color matching function of OS, video
card, etc. are set to OFF.
When using an application of which the monitor color matching function is set to ON
Output color space* 1) : The same color space as specified in the application is
specified.
ICC profile* 2) : use
When using an application of which the monitor color matching function is set to
OFF, or when using an application which does not have the monitor color matching
function.
Output color space: do not specify
ICC profile* 2) : use
When an image is scanned with this setting, the data is matched to the monitor being used.
* 1) The same color space as specified in the application is specified.
* 2) ICC profile specifies the ICC profile of the monitor being used.
2. Click the (menu) button in the Output Color Space list box, the available
output color space settings are displayed.
3. Click the desired output color space setting.
ICC profile setting