Moffat MDB900 - Manual (Page 28)

28
Replacing an oven light bulb
(Main oven)
• The type of bulb required is a 300°C 25 watt
small Edison Screw.
WARNING!
Disconnect the appliance from the electricity
supply before replacing the bulb.
• Make sure the appliance is cool before
replacing the bulb.
• Open the oven door and remove the shelves
and wirework runners.
• Pull the glass bulb cover towards you and
then pull it off. If necessary, use a
screwdriver to carefully lever off the cover,
taking care not to damage the oven cavity.
• Unscrew the bulb by turning it to the left.
• Fit a new bulb and then replace the glass
bulb cover.
• Refit the wirework runners and replace the
oven shelves.
• Restore the electricity supply and reset the
time of day.
Replacing an oven light bulb
(Top oven)
• The type of bulb required is a 300°C 25 watt
small Edison Screw.
WARNING!
Disconnect the appliance from the electricity
supply before replacing the bulb.
• Make sure the appliance is cool before
replacing the bulb.
• Open the oven door and remove the
shelves and wirework runners.
• Remove the glass cover by turning it to the
left.
• Unscrew the bulb by turning it to the left.
• Fit a new bulb and then replace the glass
bulb cover.
• Refit the wirework runners and replace the
oven shelves.
• Restore the electricity supply and reset the
time of day.