Description of functions – Momentum Sales & Marketing MO8ME User Manual
Page 17
17
Momentum mo8me Manual
Clear Settings
Sample Rate
Control Panel Functions
Chapter 3
Within this function, selecting Clr will allow the user to reset the IP to the factory default of
1.
192.168.1.1.
Toggle F2 until Adr is displayed.
2.
Tap F1 to activate Adr “edit” mode.
3.
Tap F1 to decrease value. Press F2 in increase value. (Toggle F2 to select Clr to set the IP
4.
to factory default of 192.168.1.1.)
Press and hold F1 and F2 to execute and save the change.
5.
Exit by allowing display to time out.
6.
The sample rate is currently only available in 48K. The sample rate on the mo8me is set to
default to 48K. Although 96K will be displayed as an option in the Sr function, the user will be
unable to execute and save this sample rate change.
This function can be used to reset all current mixes back to factory default (Output at full,
1.
all channels down and EQs back to fl at.) (This WILL NOT effect saved scenes. Saved
scenes can only be cleared via a PC.)
Toggle F2 to select Clr.
2.
Tap F1 to activate Clr. (It will flash)
3.
Press and hold F1 and F2 simultaneously to execute and save the change.
4.
Exit by allowing display to time out.
5.
Description of Functions
IP Address Edit