Motorola BASIC XTS 3000 - Manual (Page 38)

34
Additional Information
Alert Tones
Sound Tone Name Occurs:
Radio Self-Test Fail when the radio fails its power-up self test
Short,
Low-Pitched Tone
No ACK Received
when the radio fails to receive an
acknowledgment from the dispatcher
Reject when an unauthorized request is made
Time-Out Timer
Warning
four seconds before time out
Time-Out Timer
Timed Out
after time out
Talk Prohibit/
PTT Inhibit
when the PTT switch is pressed and transmissions
are not allowed
Continuous,
Low-Pitched Tone
Out-of-Range
when the PTT switch is pressed and the radio is
out of range of the system
Invalid Mode when the radio is on an unprogrammed channel
Individual Call
Warning Tone
when the radio is in an individual call for greater
than 6 seconds without any activity
A Group of
Low-Pitched Tones
(Busy Tone)
Busy
when interconnect channel,
phone line, or system is busy
Short,
Medium-Pitched
Tone
Radio Self-Test Pass when radio passes its power-up self test
Clear Voice at the beginning of a non-coded communication
Priority Channel
Received
upon reception of activity on a priority channel
Emergency Alarm
Entry
upon entering the emergency state
Central Echo
when the central controller has received a request
from a radio
Continuous,
Medium-Pitched
Tone
Volume Set when volume changed on a quiet channel
Emergency Exit upon exiting the emergency state
PTT Sidetone
when data is sent by pressing the PTT switch, but
the user must wait to talk
A Group of
Medium-Pitched
Tones
Failsoft when system fails
Automatic Call
Back
when voice channel is available from previous
request
Talk Permit
upon pressing the PTT switch; verifying system
accepting transmissions
Dispatcher-
Interrupter
Upon receipt of a dispatcher-interrupt call
Keyfail when an encryption key has been lost
Console
Acknowledge
when a status, message, emergency alarm, or
reprogram request ACK is received
Received
Individual Call
when a Call Alert or Private Conversation
call is received
Model I Book Page 34 Wednesday, August 14, 1996 8:51 AM