Motorola GKRMPX001 User Manual
Page 170
Advertising
167
Getting C
o
nnected
To accept a Bond:
Action
1
Make sure that Bluetooth
is turned on and in
discoverable mode.
2
When prompted to bond with the other device,
tap OK.
3
In PIN, enter a PIN of between 1 and 16
characters, and tap Next. You must enter the
same PIN that was entered on the device
requesting the bond.
4
If you want, in Name, edit
the name of the device
requesting the bond.
5
Tap Finish.
Now, the bond is created. You can now exchange
information with the other device.
Advertising