Mazda 2005 3 4-DOOR - Manual (Page 128)

Black plate (128,1)
WARNING
Cruise Main Switch:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as it may be switched on
accidentally. This could result in loss
of vehicle control. Keep the ON/OFF
switch off when cruise control is not in
use.
qTo Set Speed
1. Activate the cruise control system.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
NOTE
l The SET function can't be activated
until about 2 seconds after the ON/
OFF switch has been engaged.
l On a steep grade, the vehicle may
momentarily slow down going up or
speed up while going down.
qTo Increase Cruising Speed
Follow either of these procedures.
l Press the RES/ACCEL button and hold
it. Your vehicle will accelerate.
Release the button at the speed you
want.
5-18
Driving Your Mazda
Starting and Driving
Mazda3_8T66-EA-04H_Edition1 Page128
Thursday, June 24 2004 5:18 PM
Form No.8T66-EA-04H