Mazda 2005 3 4-DOOR - Manual (Page 201)

Black plate (201,1)
qClock
When the ignition switch is in the ACC or
ON position, the time is displayed.
Time setting
1. Press the CLOCK button until a beep
sounds, and
“12Hr” and “24Hr” will be
displayed.
2. Press the SET button to switch between
“12Hr” and “24Hr” displays. The
selected display will flash.
To select the desired clock setting,
press the CLOCK button again while
the preferred setting is flashing.
3.
“Hr. ADJUST” will be displayed next,
and the hour portion of the display will
flash. Press the SET button to set the
hour, then press the CLOCK button.
4.
“Min. ADJUST” will be displayed
next, and the minutes portion of the
display will flash. Press the SET button
to set the minutes, then press the
CLOCK button.
Time resetting
While the clock is displayed, press the
SET button 1.5 seconds or more. When
the button is released, a beep will sound
and the clock will be reset as follows:
(Example)
12:01
―12:29→12:00
12:30
―12:59→1:00
NOTE
When the SET button is released, the
seconds are reset to
“00”.
qAudio Display
The audio system status is displayed. To
operate the audio system, refer to
“Audio System” (page 6-10).
Interior Comfort
Interior Equipment
6-39
Mazda3_8T66-EA-04H_Edition1 Page201
Thursday, June 24 2004 5:19 PM
Form No.8T66-EA-04H