Metrologic Instruments VOYAGERGS MS9590 - Manual (Page 34)

30
D
ESIGN
S
PECIFICATIONS
MS9590 Series Specifications
O
PERATIONAL
Light Source: Visible Laser Diode 650 nm ± 10 nm
Laser Power: 0.809 mW (peak)
Pulse Duration: 560 µsec
MS9590 Refer to page 23
Depth of Scan Field:
MS9591 Refer to page 24
MS9590 Refer to page 23
Width of Scan Field:
MS9591 Refer to page 24
Scan Speed: 100 scan lines per second
Scan Pattern: Single Scan Line
MS9590 0.127 mm (5.0 mil)
Minimum Bar Width:
MS9591 0.075 mm (3.0 mil)
MS9590 Refer to page 25
Infrared Activation:
MS9591 Refer to page 25
Decode Capability:
Autodiscriminates all standard 1D bar codes for others
call a Metrologic service representative
System Interfaces:
RS232, Keyboard Wedge, Stand-Alone Keyboard,
RS485
“ , USB
Print Contrast: 35% minimum reflectance difference
Number Characters
Read:
Up to 80 data characters. The maximum number will
vary based on symbology & density.
Beeper Operation: 7 tones or no beep
Blue LED laser on, ready to scan
White LED good read
ON Automatic Scanning Mode
Visual Indicators:
(Default Settings)
Yellow LED
OFF Manual Activation Mode
Specifications are subject to change without notice.
“ Applicable for IBM ® host applications