Cooking – tabletop operating instructions, Attaching the propane cylinder, Assembly – Margaritaville NBMGLG1900 User Manual

Page 6: Grill performance

Advertising
background image

-4-

Fold down the condiment holder

to expose the electronic igniter

and burner control knob. Make

sure that the burner control

knob is in the OFF position.

Fold out the propane

cylinder hook on the

right side of the grill.

Attach a 1 lb. propane

cylinder. See the instructions

listed in this manual under

“Attaching the Propane

Cylinder”.

DO NOT

OVERTIGHTEN

THE PROPANE

CYLINDER.

MAKE SURE

THAT YOU DO

NOT CROSS

THREAD THE

CONNECTION.

Unlatch the hood latch and

open the grill hood.

Fold out both side tables,

slide drip pan into holder on

the underside of the grill.

COOKING – TABLETOP

OPERATING INSTRUCTIONS

To light the grill:

Refer to the Lighting instructions in this owner’s manual
and printed on the control panel of your grill. Never light
the grill without first folding out the side tables.

To preheat the grill:

Light the grill according to the lighting instructions in this
owner’s manual. Close the lid and turn the burner control
knob to Start/Hi. Preheat the grill for 5-10 minutes
(depending on conditions such as air temperature and
wind). Once the grill is preheated, set the burner control
knob to the setting specified in the recipe.

Note: Wind and weather may require adjustment of
the burner control knob to obtain the correct cooking
temperature. If the burner goes out during cooking, open
the lid, turn off the burner, and wait five minutes before
relighting.

Drippings and grease: Excess drippings and grease
will collect in the disposable drip pan. (Located on the
underside of the grill). Use a new pan before each use
and dispose of used pans properly.

WARNINGS
Check the drip pan and the bottom of the grill for

grease build-up before each use. Remove excess

grease to avoid a fire in the bottom of the grill.
Do not move the grill when operating or while the

grill is hot.
Wait for the grill to cool before folding up the

fold-out side tables.
Wait for the grill to cool before closing the

arm assembly.

Grill Performance:

The burners are located toward the back of the grill. For

indirect heat to keep food warm or cook slower, move
food toward the front of the grill.

ATTACHING THE PROPANE

CYLINDER

Use 1 lb. propane cylinders. Use propane cylinders that

are approximately 4 inches in diameter and 8 inches

in length. The propane cylinder must fit through the

cylinder hook.

Note: Your new grill is designed to be operated with 16.4

oz. disposable propane gas cylinders. The L.P. gas supply

cylinder to be used must be constructed and marked in

accordance with the specifications for L.P. gas cylinders of

the U.S. Department of Transportation (DOT) or the National

Standard of Canada.

CAN/CSA B339, Cylinders, Spheres

and Tubes for the Transportation of Dangerous Goods.

Install legs using the 6 provided

screws and a Phillips Head

Screwdriver.

Battery Installation: Remove

battery (AAA) from shipping

packet and install in battery

compartment. The battery

compartment is located behind

the electronic igniter push button

on the control panel. Rotate the

push button counter-clockwise to

expose the battery compartment.

When replacing the battery

be sure to attach positive and

negative ends correctly. Check

the igniter by pressing the

button. You should hear a

“clicking spark”

sound.

ASSEMBLY

Snap Grease

Vaporizer into

the 4 mounting

clips.

Advertising
This manual is related to the following products: