Marantz DV9600 - Manual (Page 44)

DVD Setup Menu 6
44
Audio DRC
• Default setting: Off
When watching Dolby Digital DVDs at low volume,
it’s easy to lose the low level sounds completely,
including some of the dialog. Switching on Audio
DRC (Dynamic Range Compression) can help
things by bringing up the low level sounds, while
keeping the lid on high level peaks.
The Off setting leaves the original dynamics intact;
On ‘squashes’ the dynamics; but exactly how much
difference you can hear between the settings will
depend on the material you’re watching.
Remember
• Audio DRC is only effective with Dolby Digital
audio sources.
• The effect of Audio DRC depends on your
speakers and AV amplifier settings.
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either Auto or Multi PCM selected for the
HDMI audio setting.
(pages 54, 55)
TruSurround
• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out to 2
Channel (page 39), you can simulate surround
sound by setting TruSurround to On.
Note
• Works with DVD-Video and VCD only.
• The digital audio output is processed by
TruSurround when playing 2 channel Dolby
Digital DVDs or Video CDs with TruSurround
On. It is recommended that TruSurround be
turned Off when connecting the player to your
amp using a coaxial or optical connection.
• How good the surround effect is varies with the
disc.
• When TruSurround is On, the audio can be
output only for the L/R jacks on the Front.
• This setting cannot be chosen when i.LINK is
connected or when HDMI is connected while
either Auto or Multi PCM selected for the
HDMI audio setting.
(pages 54, 55)
SRS TruSurround
SRS TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
Super Audio CD Play
• Default setting: DSD
Either DSD or PCM is selected using the cursor
button (
2/3).
• DSD
DSD that is the original format of Super Audio
CD plays. It is not possible to set the Distance
in the speaker settings.
• PCM
DSD signals are played converted to PCM. It is
possible to set the Distance in the speaker
settings.
Note
This setting is set to DSD when i.LINK is con-
nected. (pags 55)