MaxTech XT-7871 - Manual (Page 12)

11
the receiver is connected
• Consult the dealer or an experienced radio / TV technician for help
Notice: Shielded cables, if any, must be used in order to comply with the emission
limits. Any change or modification not expressly approved by the Grantee of the
equipment authorization could void the user’s authority to operate the equipment.
Canadian DOC Compliance Statement
This equipment does not exceed Class B limits for radio noise emissions for a
digital apparatus, set out in the Radio Interference Regulations of the Canadian
Department of Communications. Operation in a residential area may cause
unacceptable interference to radio and TV reception requiring the owner or
operator to take whatever steps necessary to correct the interference.
Cet équipement ne dépasse pas les limits de Class B d'émission de bruits
radioélectriques pour les appareils numériques, telles que prescrites par le
Règlement sur le brouillage radioélectrique établi par le ministère des Commu-
nications du Canada. L'exploitation faite en milieu résidentiel peut entraîner le
propriétaire ou l'opérateur à prendre dispositions nécessaires pour en éliminer
les causes.
Disclaimer, Copyright, And Other Notices
The information contained in this manual has been validated at the time of this
manual's production. The manufacturer reserves the right to make any changes
and improvements in the product described in this manual at any time and without
notice. Consequently, the manufacturer assumes no liability for damages in-
curred directly or indirectly from errors, omissions or discrepancies between the
product and the manual.
All registered trademarks are the property of their respective owners.
Copyright © 1997 MAXTECH. All rights reserved. No reproduction of this
document in any form is allowed without written permission from MAXTECH.
First Edition
GZ/DR - Version 1.0