Motorola iDEN - Manual (Page 14)

6
i2000 UserÕs Guide
Turning On Your i2000 Phone
Press until a set of icons appears on your display. (For a descrip-
tion of the icons, see page 11.) Then a message, such as ÒPlease WaitÓ,
displays while the i2000 phone connects to your carrierÕs network
First Screen Second Screen Third Screen
The second line of text on the Phone Ready screen displays the System
Name, which is the name of the network providing service in the iDEN
or GSM service area.
If your Home carrier is an iDEN carrier, then when you are in an iDEN
service area, the third line displays the local time and date. When you
are in the GSM service area, the third line displays the name of your
Home carrier.
The LED indicator located on the front of the i2000 phone shows the
service state. See Table 1 .
Table 1: Status Light (LED) Indicator
Turning Off Your i2000 Phone
Press and hold until you see the message ÒPowering OffÓ.
LED Indicator Status of Your i2000 Phone
Flashing Red RegisteringÑyour i2000 phone is
signing on to your carrierÕs network.
Please wait.
Solid Red No serviceÑyour i2000 phone cannot
sign on. It will continue trying to connect
every two minutes as long as it is turned
on.
Flashing Green In serviceÑyour i2000 phone is ready to
use.
You can now place and receive calls.
Solid Green In useÑyour i2000 phone is currently
being used. Check to make sure that
you ended the last call by pressing
.
(Your Carrier
(888)
555-1212
Message)
Please Wait
Connecting