MGA Entertainment Bratz LR06 - Manual (Page 4)

5 4
Capturing Images:
Your Camera is designed to take a series of still pictures and play them back rapidly in succession, this
process is known as animation. With animation you will be able to make your Bratz™ doll appear to come to
life! Here‛s how:
1. Pose your Bratz™ doll in a starting pose.
2. Remove the “Shutter Release” Button from its holder.
3. Press down on the “Shutter Release” Button to take a picture. The Camera will “chirp” to indicate that a
picture was taken. (Note: You can hold the “Shutter Release” Button to take a series of pictures.)
4. Move your doll‛s arm up slightly and take another picture.
5. Repeat Steps 3 and 4 as you take more pictures of your doll. Raise her arm up a little bit each time. Do
this six times.
1. 2. 3.
1. 2. 3.
4. 5. 6.
6. Now, move your doll‛s arm to the left and straighten it out as you go. Then, bring her arm back up into
the first position. Do this six times as shown below.
7. Repeat Step 6 three more times.
8. Now, move your doll‛s arm back the opposite direction. Do this seven times until the arm is in the same
place as the beginning of Step 1.
NOTE: You can remove the camera from the tripod and use the plastic viewfinder to take pictures of your
friends, pets, etc. Before you do this, adjust the Focus Ring left and right until the subject is clear on the
TV screen.
Important Note: DO NOT turn off your camera with the “ON/OFF”
Toggle Switch; otherwise your images will be lost. If you need to turn the camera off for awhile, press the
“Start/Wake up” button. 4. 5. 6.
1. 2. 3.
4. 5. 6. 7.