Metra Electronics 99-1003 - Manual (Page 4)

2
99-1003 DASH DISASSEMBLY
SEPHIA 1995-1997
Remove plastic screw cover to the
left of the coin tray and remove the
Phillips head screw from behind
cover. 2
Remove switch blank to the far
right of the switch panel and
remove the Phillips head screw
from behind switch blank. 3
Remove (4) Phillips head screws
securing the radio. Unplug and
remove the radio. 5
Unclip and remove dash trim
panel. 4
Continue to kit preparation.
* Note: Refer also to the instructions included with the aftermarket radio.
Disconnect the negative battery
terminal to prevent an accidental
short circuit. 1