Motorola WN825G - Manual (Page 10)

SECTION 2, INSTALLATION 2-1
Section 2:Installation
To install the software and hardware:
1 Insert the supplied CD-ROM into the CD-ROM drive.
2 The software automatically starts the Installation Wizard program.
3 Follow the prompts to setup your adapter card.
If Windows 98SE prompts you for the original Windows CD-ROM,
insert the CD-ROM, and direct Windows to its proper location (for
example, D:\WIN98).
4 Locate an empty CardBus slot on your notebook PC.
5 With the adapter card product-label and LEDs facing up, insert
the adapter card into the CardBus slot:
6 Complete the installation instructions supplied on the CD-ROM.
Device Configuration Setup
After installing the adapter card and software, you will need to
connect to a network. Refer to Section 3:Configuration for information
on how to create detailed connectivity profiles so you can connect to
a wireless network, setup security, and setup modes of operation.