Motorola WN825G - Manual (Page 19)

CONFIGURATION SECTION 3
SECTION 3, CONFIGURATION 3-9
4 The Wireless Network Properties window is displayed:
5 If the network you want to configure is open (no encryption, no
authentication), click OK and this network is added to the list of
preferred networks.
6 If the network is not open and requires WEP data encryption,
click Data encryption (WEP enabled).
7 If the network is not open and requires network authentication,
click Network Authentication (Shared mode).
8 Edit the fields that you want to change for the selected wireless
network. For additional information about the fields on this
window, refer to Configuring a New Wireless Network.
9 Click OK.