Madrigal Imaging N380 - Manual (Page 7)

7
Operating Voltage
The Nº380 Preamplifier is set at the factory (internally) for 100V, 120V, 200V, 230V,
220V, or 240V AC mains operation @ 50 or 60Hz. (230V/50Hz only in European
Union countries, in compliance with CE regulations.) This voltage setting cannot
be changed by the user.
Make sure that the label on the bottom panel of the Nº380 (adjacent to the AC
cord) indicates the correct AC operating voltage for your location.
If the voltage indicated on your Nº380 is incorrect, or if you wish to change the
AC operating voltage of your Nº380 as the result of moving to a different country
than the one in which you purchased your digital audio processor, see your Mark
Levinson dealer.
The Nº380 is easily powered by a normal 15-ampere AC mains line. If other de-
vices are also powered from the same AC line, their additional power consump-
tion should be taken into account.