Mitel GPS Orion-S/-HD Receiver - Manual (Page 35)

Document Title: 31
User’s Manual for the GPS Orion-S/-HD Receiver
Document No. Issue 1.0
GTN-MAN-0110 June 22, 2003

DLR/GSOCNo part of this document shall be reproduced in any form or disclosed to third parties without prior authorization.
4.3.4.5 LE – Load Epoch
CmdID Chars. Format Description
LE 25 Load Epoch
1 x <STX>
2 xx Command Id (=LE)
4 xxxx Year
2 xx Month
2 xx Day
2 xx Hours
2 xx Minutes
4 xx.x Seconds
3 xxx Time system (UTC, GPS)
2 xx Checksum
1 x <ETX>
4.3.4.6 LT – Load Trajectory
CmdID Chars. Format Description
LT 6 Load Trajectory
1 x <STX>
1 x <STX>
2 xx Command Id (=LT)
2 xx Checksum
1 x <ETX>
4.3.4.7 ET – End Trajectory
The sequence of trajectory polynomials is terminated by the ET command
CmdID Chars. Format Description
ET 6 End Trajectory
1 x <STX>
2 xx Command Id (=ET)
2 xx Checksum
1 x <ETX>
Example:
<STX>ET11<ETX>
Dump current reference trajectory
4.3.4.8 TT – Transmit Trajectory
The TE command initiates the output of the reference epoch and the trajectory polynomials
uswed for aiding of ballistic vehicles.
CmdID Chars. Format Description
TT 6 Transmit Trajectory
1 x <STX>
2 xx Command Id (=TT)
2 xx Checksum
1 x <ETX>
Example:
<STX>TT00<ETX>
Dump current reference trajectory