Monster Cable PERFECTVIEW 450L - Manual (Page 22)

18
Attaching the Power Unit
to the PowerMount
Insert the power unit mounting bracket in the
square-shaped slot on the back of the power unit,
as shown to the right.
Secure the power unit mounting bracket to the
power unit with two Phillips screws, labeled “A” on
the hardware bag.
Hang the power unit mounting bracket on the two rivets
on the power unit mounting plate.
Pull the power unit down to safely secure it on the power
unit mounting plate.
Attach the power unit’s Quick-Snap screw cap.
1)
2)
3)
4)
5)