Muratec MFX-C2700 User Manual
Page 26
Advertising
Getting started > 26
7.
To use ActKey in Local PC mode (i.e. push scanning), it must be set as the program
to handle scanner events:
(a)
Select Start > Control Panel.
(b)
Double-click Scanners and Cameras.
(c)
Right-click the MFP icon and click Properties.
(d)
Select the Events tab.
(e)
Choose an event from the Select an event drop-down menu.
(f)
In the Actions field, click Start this program and choose ActKey from the
drop-down menu.
(g)
Click Apply.
(h)
Repeat steps
e
to
g
for each event, e.g. Scan to Application, Folder and PC-Fax.
(i)
Click OK to confirm.
NOTE
The following example uses Windows XP. The steps may vary if you are using
any other operating system, but the principle is the same.
Advertising