Muratec MFX-C2700 User Manual
Page 84
Faxing > 84
DRD
This mode allows the machine to detect a distinctive ring if it has been enabled on the
phone line. In this mode, the machine distinguishes the DRD type of the sender. The
machine then answers only when it matches the registered DRD type.
You can register up to four DRD types:
Type 1: short-long
Type 2: long-long
Type 3: short-short-long
Type 4: short-long-short
Refer to
.
Printing received faxes
The machine automatically prints out the received fax.
Images larger than the specified paper are reduced, discarded, or printed onto multiple
sheets of paper depending on the reception print settings. Refer to
If the machine cannot print received faxes due to a lack of paper or a paper jam, it will
store the received fax data temporarily it’s memory. When the problem is resolved, it starts
printing automatically.
NOTE
>
Use only standard or recycled paper.
>
Available paper sizes are A4, letter, or legal.
NOTE
For details on how to load paper, refer to
.
For details on how to clear paper jams, refer to
.
To check the reception history, refer to
.