MicroNet Technology SP616DB User Manual
Page 7
Figure 8: Main menu
System Change
The System Change parameters can be displayed by clicking the System Change button in the
left sub-menu.
Figure 9: System Change
z
Switch Name: Type a switch name and replace the current switch name with a new one.
(Please restart your Computer once the Switch Name is replaced and saved under
“Save Configuration “by the new name ).
Note: only “a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can not
exceed 16 characters.
z
Password: Enter a user-defined password and change the factory default password.
Note: only “a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can not
exceed 16 characters.
z
Apply: Click the Apply button and apply the new System settings.
7