Miele HG02 - Manual (Page 27)

For openings exactly 17 3 /
4
" (45 cm) or
23 5 /
8
" (60 cm) wide:
^ Open the dishwasher door and re-
move the caps covering the mount-
ing holes on the outer edge of the
wash cabinet.
^ Fasten the dishwasher to the adja-
cent cabinets using the supplied
screws and bushings. A bushing
must be placed over the screw be-
fore inserting it into its mounting hole.
^ Tighten the screws and insert the
caps.
,
The side mounting holes
should only be used for securing
the dishwasher if the opening is
exactly 17
3
/
4
" (45 cm) wide (slim
line models) or 23 5 /
8
" (60 cm)
wide (full size models).
Use of this method on larger
openings can damage the ma-
chine and cause leaks. Be careful
not to screw into an adjacent ap-
pliance.
Installation
27