Murray EV3850x4NA - Manual (Page 13)

OPERATION
13 F–041105C
EDGING TIPS
S Edging is best performed when conditions
are dry. If the soil is to wet, dirt becomes
packed around the blade causing prema-
ture belt wear and decreased perfor-
mance.
S If dirt does become packed around the
blade, stop the engine and remove the
wire from the spark plug. Remove the
packed dirt and debris from the blade.
S For deep edging, first cut at shallow
depths. Then, cut at greater depths until
the desired depth is obtained.
S For uniform edging, make sure the blade
guide rides on the surface.
S Edging can be customized by varying the
number of passes and by the distance the
blade is from the surface.
WARNING: Read the Owner’s
manual. Know location and
functions of all controls. Keep
all safety devices and shields in place.
Never allow children or uninstructed
adults to operate Edger. Shut off engine
before unclogging blade or making re-
pairs. Keep bystanders away from ma-
chine. Keep away from the blade all ro-
tating parts, which cause injury.