Assembly, How to prepare the engine, Checklist – Murray EV3850x4NA User Manual

Page 8

Advertising
background image

ASSEMBLY

8

F–041105C

HOW TO PREPARE THE ENGINE

ENGINE DOES NOT CONTAIN

OIL OR GASOLINE

See the engine manufacturer’s instructions

for the type of gasoline and oil to use. Before

you use the unit, read the information on

safety, operation, maintenance, and storage.

This Edger was shipped with a 20 ounce

container of SAE30 motor oil. Add this oil to

the engine before operating. To fill the crank-

case, remove the oil fill cap/dipstick and add

the SAE30 motor oil. DO NOT OVERFILL.

NOTE: The engine may contain a small

amount of oil. When adding oil, frequently

insert the oil fill cap/dipstick and check

the amount of oil in the engine. DO NOT

OVERFILL.

WARNING: Follow the engine

manufacturer’s instructions for

the type of gasoline and oil to

use. Always use a safety gasoline con-

tainer. Do not smoke when adding gaso-

line to the engine. When inside an en-

closure, do not fill with gasoline. Before

you add gasoline, stop the engine. Let

the engine cool for several minutes.

IMPORTANT: This unit is equipped with an

internal combustion engine and must not

be used on or near any unimproved forest–

covered, brush–covered or grass–covered

land unless the engine’s exhaust system is

equipped with a spark arrester meeting ap-

plicable local or state laws (if any). If a

spark arrester is used, it must be main-

tained in effective working order by the op-

erator.
In the State of California the above is re-

quired by law (Section 4442 of the Califor-

nia Public Resources Code). Other states

may have similar laws. Federal laws apply

on federal lands. See an Authorized Ser-

vice Center for a spark arrester for the muf-

fler.

n

CHECKLIST

For the best performance and satisfaction

from this quality product, please review the

following checklist before you operate the

Edger:

n

All assembly instructions have been

completed.

n

Check carton. Make sure no loose

parts remain in the carton.

n

All fasteners have been properly tight-

ened.

As you learn how to use the Edger, pay extra

attention to the following important items:

nn Engine oil is at proper level.

nn Fuel tank is filled with a fresh, clean,

regular Unleaded gasoline.

nn Become familiar and understand the

function of all controls. Before your

start the engine, operate all controls.

Advertising