Maretron ACM100 - Manual (Page 6)

ACM100 User’s Manual
Page 2 Revision 1.2
o 230VAC single phase
o 380VAC Y Three-phase (380Y)
1.3 Quick Install
Installing the Maretron ACM100 involves the following five steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 2.1)
2. Choose a mounting location (Section 2.2)
3. Mount the ACM100 (Section 2.3)
4. Connect the ACM100 (Section 0)
5. Configure the ACM100 (Section 2.5)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron ACM100, you should find the following
items:
1 – ACM100 – AC Monitor
1 – AC Current Transformer with 5 ft. (1.5m) long cable (Part # M000630)
1 – Parts Bag containing 4 Stainless Steel Mounting Screws
1 – ACM100 User’s Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
Please consider the following when choosing a mounting location.
1. The ACM100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the ACM100 can be mounted on a horizontal deck,
vertical bulkhead, or upside down if desired.
3. The ACM100 is temperature rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.