Miele M8260-1 - Manual (Page 11)

Allow the microwave to sit unpacked
for approx. 2 hours after transport
before connecting to the power
supply.
This is important for the electronic
functioning of the appliance.
^ Remove all protective packaging and
foil from the appliance.
Do not remove the protective film
from the inside of the door, or the
cover to the outlet inside the
microwave.
^ Check the appliance for any visible
damage.
Do not operate the microwave if it is
damaged. It is particularly important
that the microwave door closes
properly and that there is no
damage to the: (1) door (bent), (2)
hinges and latches (broken or
loosened), (3) door seals and
sealing surfaces.
^ Clean the interior of the microwave
and all accessories with a mild
solution of warm water and liquid
dish soap. Dry with a soft cloth.
^ Stick the included short instructions
to the frame behind the door (as
shown). Be sure not to block the
vents.
Before the first use
11