Miele M8260-1 - Manual (Page 5)

Children
~
As with any appliance, close
supervision is necessary when used by
children.
Technical safety
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician in
accordance with national and local
safety regulations and the provided
installation instructions. Contact Miele’s
Technical Service Department for
examination, repair or adjustment.
~
Before installation make sure that
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond in order to prevent
injury and machine damage. If in doubt,
consult a qualified technician.
~
To guarantee the electrical safety of
this appliance, continuity must exist
between the appliance and an effective
grounding system. This appliance must
be grounded. Connect only to properly
grounded outlet. See "Electrical
connection - GROUNDING
INSTRUCTIONS". It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
~
The appliance must only be
operated after it has been correctly
installed into cabinetry. This is
necessary to ensure that all electrical
components are shielded.
~
Before installing the oven, check for
externally visible damage. Do not
operate a damaged appliance.
~
This appliance must not be installed
or operated outdoors.
~
Do not use this product near water –
for example, near a kitchen sink, in a
wet basement, near a swimming pool,
or similar locations.
~
Do not mount over a sink.
~
Do not store anything directly on top
of the appliance surface when the
appliance is in operation.
~
Defective components should be
replaced by Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.
~
This appliance is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
installation in these applications. Please
contact the Miele Technical Service
Department with specific requirements.
~
Before service or maintenance work
the power supply must be
disconnected.
IMPORTANT SAFETY INSTRUCTIONS
5