Minicom Advanced Systems IP Control - Manual (Page 6)

IP CONTROL
5
5. The IP Control unit
Figure 1 illustrates the front panel of the IP Control.
Keyboard
Mouse
Monitor
LAN (Ethernet)
connector
LAN
Figure 1 IP Control ports – side 1
For (optional) local access to the connected computer you connect a keyboard,
monitor and mouse to the above KVM ports. Connect the IP Control to a 10/100
Mbit Ethernet using the LAN port.
KVM In Serial
3.3V/2A
Go Local
Power
KVM In
Serial
Power
Go Local
button
Power
LED
Figure 2 IP Control ports – side 2
Connect a computer or KVM switch to the KVM In port using the 1 to 3 CPU
cable. You press the Go Local button to disconnect the remote session and access
the computer locally.
Connect an RS232 device to the Serial port using the RS232 Cross cable.
6. Pre-installation guidelines
Place cables away from fluorescent lights, air conditioners, and machines that are
likely to generate electrical noise.