Milan Technology MIL-S1000 - Manual (Page 17)

P ort 1
P ort 3
P ort 4
P ort 2
D IP S w itch Lo ca tio n Ful
l Du
p
lex
Ha
lf D
u
p
lex
4
3
2
1
ON OF
F
Figure 1-9. Location and setting duplex mode
The following Table1-3. lists the ports operating modes
based on the DIP switch position.
PORT 1 PORT 2 PORT3 PORT4
SW 1 2 3 4
ON Half-Duplex Half-Duplex Half-Duplex Half-Duplex
OFF Full-Duplex Full-Duplex Full-Duplex Full-Duplex
Table 1-3. 4 ports 100Base-FX Fiber Module DIP switch functions
4 ports 100Base-FX Fiber Module Feature
" Conforms to IEEE 802.3u Fast Ethernet standard
" Support SC, ST, MT-RJ or VF-45 fiber connector
(optional)
" Support half and full duplex via DIP switches
" Store-and-forward switch architecture for abnormal
packets filtering