Philips Magnavox CCZ190AT - Manual (Page 37)

Setting the Sleep Timer 37
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the SLEEP button. The sleep timer display will appear
on-screen. (You can not set the sleep timer during a recording.)
1-2
• Finish all recordings before the
TV/VCR shuts itself off. If a record-
ing is in progress, the sleep timer
will be cancelled.
• A timer recording will not begin
unless the TV/VCR power is off.
Two minutes before a timer record-
ing starts, PLEASE TURN OFF FOR
TIMER RECORDING flashes on-
screen. If you see this message, turn
off the TV/VCR.
• If the power fails, you might lose
the sleep timer setting.
Helpful Hints
SLEEP 10 SEC
GOOD NIGHT
SLEEP 0 MIN
2
Within five seconds, press the SLEEP button repeatedly
to select 30 minutes, 60 minutes, 90 minutes, or 120 min-
utes. In a few seconds, the display will disappear. Then the
TV/VCR will shut itself off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on-screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
● To see how much time remains until the TV/VCR shuts itself
off, press the SLEEP button once. The time remaining will
appear on-screen briefly. You cannot do this during a recording.
● To cancel a sleep timer setting, press the SLEEP button until 0
MIN appears on-screen. The on-screen display will disappear in
a few seconds. You cannot cancel the sleep timer during a
recording.
POWER CLEAR STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP
MUTE SPEED VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL STOP/
+100 ALT.CH
MENU
MEMORY
CCZ190comb.QX33 4/5/99 9:51 PM Page 37