MITSUBISHI ELECTRIC XD20A - Manual (Page 30)

E – 30
Selecting a Menu Language
Any one of eight different languages can be selected for
menu displays.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
ᮤ / ᮣ keys to select “OPTION”.
2
When OPTION menu is displayed, use the
cursor / keys to select “LANGUAGE”,
then press the ENTER button.
3
Use the cursor / keys to select one of
the following languages.
● English
● German
● French
● Italian
● Swedish
● Spanish
● Chinese
● Japanese
Setting the Menu Display Position
The menu display position can be set with this function.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
ᮤ
/
ᮣ
keys to select “OPTION”.
2
When OPTION menu is displayed, use the
cursor / keys to select “MENU POSI-
TION” and then press the ENTER button.
3
Use the cursor / , ᮤ / ᮣ keys to set the
display position.
S e t t i n g t h e M e n u
Menu Viewing Settings
The menu viewing method can be set with this function.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
ᮤ / ᮣ keys to select “OPTION”.
2
When OPTION menu is displayed, use the
cursor / keys to select “MENU TYPE”.
3
Use the cursor ᮤ / ᮣ keys to select
“TRANSLUCENT” or “OPAQUE”.
Other Menu Settings
The time that the menu is displayed on the screen can be
set with this function.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
ᮤ / ᮣ keys to select “OPTION”.
2
When OPTION menu is displayed, use the
cursor
/ keys to select “DISPLAY
TIME”.
3
Use the cursor
ᮤ
/
ᮣ
keys to set a value
from 5 sec. to 30 sec.
On-screen Display
This function is set to ON at the factory. When set to ON,
input will be projected onto the screen when the input is
switched with the remote control button. Also, the Input
menu will be displayed when the power is turned on to
indicate the selected input. In addition, status is displayed
on the menu bar when FREEZE, MUTE, ZOOM, KEY-
STONE or VOLUME is set.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor
ᮤ / ᮣ keys to select “OPTION”.
2
When OPTION menu is displayed, use the
cursor / keys to select “ON SCREEN”.
3
Use the cursor ᮤ / ᮣ keys to set ON or
OFF.
To select other menu names
Press the MENU button. The cursor will disappear and the menu
selection screen will be displayed.
To close the menu
Press the CANCEL button.