Philips Magnavox 13MT143S User Manual
Page 11
Advertising
11
EXIT
VOL+
I
t’s important for the TV to know what type of sig-
nal - Cable TV or a normal Antenna - you are
using. To tell the TV whether you are using a Cable
TV signal, set CABLE to YES or NO as follows.
1
Press MENU to see the menu.
2
Press 8 or 9 to scroll through the
menu until SETUP is highlighted.
3
Press : to enter the SETUP menu.
4
Press 8 or 9 to scroll through the
SETUP menu until CABLE is highlight-
ed.
5
Press : to turn CABLE YES or NO.
Cable TV Control
When CABLE is YES, chan-
nels 1-125 are available.
When CABLE is NO, only
channels 2-69 are available.
The menu will disappear
when you finish. Or, press
STATUS/EXIT to clear the
menu from the screen.
Helpful Hints
Advertising