Philips Magnavox 13MT143S - Manual (Page 24)

24
9
EXIT
CH+
SmartLock Access Code
O ver the next few pages you’ll learn how to
block programs and understand the rating
terms for certain broadcasts. First, set a personal
access code.
1 Press MENU to see the menu.
2 Press 8 or 9 until SMARTLOCK is
highlighted.
3 Press : to display the SMARTLOCK
REVIEW screen.
4 Press : again. The on-screen display
will read “ACCESS CODE ----.”
5 Use the Number buttons to enter
0711. “XXXX” appears on the screen
as you press the Number buttons.
When 0711 is entered correctly, pro-
ceed to step 6.
If you enter a wrong digit, “INCOR-
RECT CODE” will appear on the
screen.You will be asked to “PLEASE
ENTER AGAIN.” Enter 0711 again.
6 Press 9 until CHANGE CODE is
highlighted.
7 Press : to change your personal
Access Code.
8 Enter a new four-digit code using
the Number buttons. The screen will
ask you to confirm the code you just
entered. Enter the same new code
again. “XXXX” will appear when you
enter your new code.
After confirming the new code, the
on-screen menu will return to the
BLOCK option. Continue through the
next few pages to learn how to block
program ratings.
Or, press STATUS/EXIT to remove the
menus.
To restore the default access
code (0711), unplug the TV’s
power cord for 10 seconds.
When you restore the
power, the access code will
be 0711 again.
It isn’t possible to unblock a
channel without knowing the
access code or changing it. If
your code changes, someone
else has altered it and possi-
bly viewed blocked channels.
Helpful Hints