Magnadyne LS6300 - Manual (Page 4)

4
FM Stereo Operation
The unit will automatically switch from FM mono to FM stereo
when the signal strength increases to a stereo level. If the signal
should become weak on stereo reception, the unit will switch
back to the mono mode.
Note: Stereo operation is indicated by the stereo light (3) on the
front of the unit.
Tape Operation
1. Press the on / off button (1) to turn the unit on.
2. Press the stop / eject button (9) to open the cassette door.
3. Insert a cassette tape in the cassette carriage with the tape
opening down and the programs you want to listen to facing
you. Close the tape carriage door.
4. Press the play button (6).
5. To stop the tape play, press the eject button (9) once.
6. To release the tape carriage door and eject the tape, press
the stop / eject button (9) again and the door will open.
Fast Forward and Fast Rewind
To fast forward or rewind a tape, press the fast forward button
(
ᮣᮣ ) or the rewind button ( ᮤᮤ ) until it locks. To release the
button, press the stop / eject button ( Ⅵ ) once. To resume normal
play, press the play button ( ᮣ ).
AUX Operation
1. Set function knob (2) to the AUX position.
2. Turn on the item connected to the AUX inputs.
3. The volume, tone and balance controls will operate normally.
CONTROLS AND FUNCTIONS
16. CD Input
Plug one end of a CD jumper cable into this receptacle and
plug the other end into the "line out" receptacle or
"headphone" receptacle of your portable CD player
It is strongly recommended to use the "line out" receptacle
of the portable CD player. The LS6000 and LS6300's
volume, balance and tone controls will operate normally
when the CD input is used
17. Digital Display Clock (LS6300 Only)
This area displays the time. See the operations section of
this manual for further information.
18. Clock Illumination Button (LS6300 Only)
Pressing this button will illuminate the digital display clock
and will go off automatically when the button is not being
pressed.
19. Clock Mode Button (LS6300 Only)
This button is used to set the clock, date, alarm and hour
chime. See the operations section of this manual for further
information.
20. Clock Set Button (LS6300 Only)
This button is used to adjust the time, day / date, alarm time
and hour chime. See the operations section of this manual
for further information.
Radio Operation
1. Press the on / off button (1) in to turn the unit on.
2. Use the function knob (2) to select the AM or FM radio band.
3. Tune in the desired radio station by rotating the tuning knob
(4).
4. Adjust the volume, balance and tone controls as desired.