Magnadyne LS6300 - Manual (Page 6)

6
How to Turn On/Off the Alarm Clock and Hour
Chime (LS6300 Only)
1. With the normal time display showing, press the mode button.
(The time display will begin to flash)
2. Press the set button. (The alarm on indicator will be displayed
at the top the display area)
3. Press the set button again. (The hour chime indicator will be
displayed at the button of the display area)
4. Press the set button again. (The alarm indicator will disappear
and the alarm will be off)
5. Press the set button again. (The hour chime indicator will
disappear and the hour chime will be off)
AL AL
➧ ➧ ➧ ➧ ➧
Press
Mode Press
Set
Press
Set
Press
Set
Normal time with
colon blinking. Hour / minute
blinking. Alarm is ON. Hourly chime is
ON. Alarm is OFF.
AL
Press
Set
AL
Hourly chime is
OFF.
AL
How to Quick Check All Settings: (LS6300 Only)
1. With the display showing the time, press the set button. (Alarm
time will show)
2. Press the set button again. (Month and day will be displayed)
3. Press the set button again. (The seconds will be displayed)
4. Press the set button again. (Display will be normal time)
AL
➧ ➧ ➧ ➧
Press
Set
Press
Set
Press
Set
Press
Set
Normal time with
colon blinking. Alarm Time Month / Day. Seconds Normal time with
colon blinking.
After 2 seconds will return to normal time
Note: In the alarm time and month / day modes, the display will
change back to the normal time if the set button is not pushed
within 2 seconds of these two display modes.
CONTROLS AND FUNCTIONS