Miele G 4570 - Manual (Page 29)

Turning on
^ Open the water supply, if it is closed.
^ Open the door.
^ Make sure the spray arms can rotate
freely.
^ Press the U button to turn the
dishwasher on.
The
U indicator and the indicator of the
last set program light up.
Selecting a program
Choose your program according to the
type of load and soiling.
See the "Program Guide" for more
information.
^ Select the desired program with the
Program selection button.
The indicator light for the selected
program will come on.
You can now select any additional
options (see "Additional Options").
Starting a program
^ Start the program by closing the
door.
Cancel a program only in the first
few minutes.
Otherwise important program steps
(e.g. the water softening) may be
interrupted.
Standby
A few minutes after the last key is
pressed or at the end of the program
the dishwasher will switch into Standby
mode to save energy. The display and
the indicators are turned off and only
the
U indicator lights.
^ To turn the dishwasher back on press
any key (except
V).
If refill salt and/or rinse aid or a fault
are present in the display, the
dishwasher will not switch to
Standby mode.
Use
29