Memorex iTrek Mi3001 - Manual (Page 8)

7
OPTIONAL CONNECTIONS
A/V (Audio/Video) OUT JACK
(REAR OF UNIT)
If you are using an iPod with video (5th generation) or iPod photo, you can connect
this unit to an external TV with the included audio/video cable. You will then be able
to view the photos (in Slideshow mode)/videos, and hear the audio, from the iPod on
your external TV.
NOTES:
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting this unit, refer to the owner’s manual of the TV, as well as
this manual.
• When connecting this unit to the TV, make sure the power is off and both units
are unplugged before making any connections.
• Make sure to go into the Settings menu of your iPod and set the TV Out setting
to ON and set the TV signal to NTSC; otherwise, you may not be able to view
the photos (in Slideshow mode)/videos on your external TV.
LINE IN JACK (REAR OF UNIT)
Insert one end of the audio cable (included) into the LINE OUT jack on your
external audio unit and the other end into the LINE IN jack on the rear of this unit.
To listen to the external audio unit, press the MODE button to select “L-IN” (Line In)
mode. The external audio unit’s output sound will be heard through this unit's
speakers. Adjust the volume and the BASS button as shown on page 10. It is
suggested that you unplug the audio cable when you are not listening to the
external audio unit.
AUTO POWER OFF
If there is no signal input, and no controls are used, for five minutes, this unit will
automatically turn off.
HEADPHONES JACK
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to
this jack. The speakers are automatically disconnected when the headphone plug is
inserted in the jack.
LEFT & RIGHT UNIT “LEGS”
(BOTTOM OF UNIT)
Fully extend the Left and Right Unit “Legs” upward and outward to create a stand
for your unit.