Miele 06 702 810 - Manual (Page 45)

Problem Possible cause Remedy
The Wash/Rinse,
Drying and End
indicator lights flash
simultaneously.
Fault code FXX shows
in the display. There may be a
technical fault. – Switch the dishwasher off
with the On/Off button s.
After a few seconds:
– Switch the dishwasher back
on.
– Select the programme
required with the
programme selector button.
– Press the Start/Stop button.
If the programme sequence
indicator lights flash again,
there is a technical fault.
– Call the Service
Department.
The drain pump works
even when the door is
open. Fault F70:
The Waterproof System
has reacted. – Turn off the stopcock.
– Call the Service
Department.
Problem solving guide
45