Remote control setup 7 – Philips Magnavox 9MDPF20 User Manual

Page 7

Advertising
background image

Remote Control Setup 7

Using the Remote Control

Point the remote control at the remote sensor on the front
of the TV/DVD. Details are on page

16.

Do not put objects between the remote and the TV/DVD.

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the
bottom of the remote control by sliding the lid down
and off, following the direction of the arrow on the
lid.

2

Place two AA batteries inside the battery
compartment
with their + and – ends aligned as
indicated.

3

Replace the battery compartment lid.

1

2

3

Recycling Guidelines/Battery Safety

Your new product and its packaging contain materials
that can be recycled and reused. Specialized compa-
nies can recycle your product to increase the amount
that needs to be properly disposed. Your product
uses batteries that should not be thrown away when
depleted but should be disposed of as small chemical
waste. Please find out about the local regulations on
disposal of your old product, batteries, and packaging
whenever you replace existing equipment.

Battery Usage CAUTION - To prevent battery leak-
age that may result in bodily injury, property damage,
or damage to the unit:
• Install ALL batteries correctly, with the + and -
markings on the battery aligned as indicated on the
unit;
• Do not mix batteries, for example, old with new or
carbon with alkaline; and
• Remove batteries when the unit will not be used for
a long time.

TD007_9MDPF20_V3.QX33 04.2.18 1:51 AM Page 7

Advertising