Philips Magnavox 9MDPF20 - Manual (Page 9)

Hooking Up the TV/DVD (cont’d) 9
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
ANT.
AUDIO
L R
L R
AUDIO/VIDEO In
Jacks on front of
TV/DVD
AUDIO/VIDEO OUT
Jacks on VCR
(example only)
Connect audio cables to the
AUDIO OUT Jacks on the
VCR and to the red and
white AUDIO In Jacks on
the front of the TV/DVD.
Connect a Video cable to the
VIDEO OUT Jack on the VCR and
to the yellow VIDEO In Jack on
the front of the TV/DVD.
2 When all other connections are
complete, plug in the TV/DVD’s
power cord.
3 Before you turn on the TV/DVD,
go to page 12.
AUDIO OUT
DC 13.2V
L
R
COAXIAL
ANT.
ANT.
Rod Antenna
(supplied)
D Hooking Up Your TV/DVD to Another
Video Source
(VCR, DVD Player, Camcorder, etc.)
You may need this connection if you want to
play Discs or tapes on other equipment but
watch them on the TV/DVD. Press the SELECT
button on the remote to choose AUX at the
TV/DVD when viewing materials playing on
other equipment.
Audio and video cables are not supplied.
C Hooking Up Your TV/DVD
with the supplied Rod Antenna
To install the supplied rod antenna, push the
stem of the antenna into the antenna hole at
the top on the rear of the TV/DVD. Connect
the antenna wire to the ANT(enna) Jack on the
rear of the TV/DVD as shown. Extend the
antenna and adjust its length, direction, and
angle for the clearest picture.
TD007_9MDPF20_V3.QX33 04.2.18 1:51 AM Page 9