Motorola BRUTE H85XAH6JR5AN - Manual (Page 45)

41 basics
choose your hearing aid setting
Find it: / > u > Phone Calls > Hearing Aid.
1 Set this option to Microphone. Microphone
coupling is now optimized.
or
2 Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound or set this option to Off
(factory default). This is the setting for non
HA users.
TTY
Note: The TTY device must be connected to
the phone through the micro-USB port.
A 2.5 mm to micro USB adapter is required to
support TTY.
Approximate telecoil location is just
above the battery.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
feature
turn On TTY
feature Press / > u >
Phone Calls > TTY > Use TTY > On.
choose TTY
mode Press / > u >
Phone Calls > TTY > Type.
Select from TTY, VCO or HCO.
change the
TTY baud
rate Press / > u >
Phone Calls > TTY > Baud.
Select 45.45 or 50.00.
change TTY
mode
during a call While in the TTY call, press
/ > In Call Setup > TTY > Type.
Select from TTY, VCO or HCO.