Motorola BRUTE H85XAH6JR5AN - Manual (Page 87)

83 LINCaround
switching to
LINCaround
To set your phone to LINCaround:
1 From the home screen press / > p >
LINCaround and press r.
2 Select Go to LINCaround.
Switching to LINCaround Please Wait displays.
After a few seconds, the LINCaround idle
screen displays. When LINCaround Ready
displays, you can begin using LINCaround.
While in LINCaround, this icon 4 displays.
exiting LINCaround
To switch to network mode:
1 From the LINCaround idle screen, press
/ > p > LA Options and press r.
2 Select Exit LINCaround.
Switching to Network Please Wait displays. After a few
seconds, the network idle screen appears.
talk range
While in LINCaround mode, phones should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same
channel. Codes minimize interference from
other parties when you are sharing the same
channel.
LINCaround opens to the last code and
channel used on your phone. You can view the
code and channel your phone is currently set
to on the LINCaround idle screen.