MGE UPS Systems Pulsar EXtreme C UPS 1000 VA - Manual (Page 3)

Pulsar EXtreme C is only two units high (2U)
and fits perfectly in your network or telecom
bays.
◗ Easy installation and integration
• Tower or 19”-rack models
• Complete installation kit
Pulsar EXtreme C is supplied with telescopic
rails and all the necessary hardware
• Quick start-up guide
• Easy connection to AC power.
◗ UPScontrol remote display
Using UPScontrol, the
various UPS
parameters are remotely
displayed.
◗ MultiSlot expansion module
This module provides three additional
communications slots and concentrates
the data from an installation comprising
redundant UPSs
◗ Communications slot
Lets you add an SNMP, dry contact, etc.
communication card.
The cards make UPS
communication
totally independent.
For example, they
keep you informed
of UPS status when
the server is shut
down.
◗ Individual management of
outlets with Powershare TM
The programmable outlets
make it possible to save
battery power for the most
critical applications. They
may also be used to
remotely restart or reset a
faulty device without
interrupting the other
protected devices.
Flexibility and scalability
Advanced communications Ease of use
ON/OFF
operation on battery
operation in ON-LINE mode
operation on bypass
status of
programmable
outlet no.1 lamp test or buzzer off
forced transfer to and from
bypass
UPS overload
electronics fault
battery fault
press and hold to display
percent load
% battery backup time
Pulsar EXtreme C UPSs offer communications solutions and accessories for remote UPS control
and monitoring.
Pulsar EXtreme C can adapt easily to all your needs, today and tomorrow.
◗ Comprehensive display
and controls
◗ 2 communications ports
USB
communications port
RS232
communications port
status of
programmable
outlet no.2
◗ Backup times from 6 minutes to
several hours
Pulsar EXtreme offers a standard backup
time of 6 minutes.
To ensure greater continuity of service,
it is possible to:
• connect up to three Pulsar EXB battery
extension modules to the UPS, without
interrupting the supply of power to the
protected applications;
• use the CLA module (long backup-time
charger) for very long backup times of up
to eight hours at full rated load.
Feel free to contact us for details.
◗ Hot-swappable batteries
Users can replace the batteries themselves
without having to shut down the protected
equipment.
◗ Warranty and services
Pulsar EXtreme C is covered
by a two-year full
warranty.
The optional MGE
Warranty+ extension
ensures user peace
of mind for three
years on site.
An RS232 and a USB port are available
for easy connection of the UPS to the
server. It may be used for:
• personalization of Pulsar EXtreme C
by modifying the factory-set parameters
(output voltage, intervals between battery
tests, operation on bypass, etc.) via
UPS-Driver software.
• local or remote administration
(SNMP/WEB) of the UPS and the protected
servers, using Solution-Pac software.
◗ Solution-Pac software
Solution-Pac may be used to:
• alert users;
• automatically shut down different
servers in a heterogeneous environment;
• remotely supervise and control UPSs.
Pulsar EXtreme 1500 C + 3 Pulsar EXB
modules for 80 minutes of backup time
at full rated load .