Motorola Boost i296 - Manual (Page 37)

33 basics
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
choose your hearing aid setting
Find it: / > R Settings > Phone Calls > Hearing Aid
> Off or Microphone or Telecoil
The Microphone option optimizes your phone for
microphone coupling. The Telecoil option meets
US federal requirements for telecoil coupling.
The factory default setting for this feature is
Off.
TTY
Approximate telecoil location is just
above the battery.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
feature
turn on TTY
feature Press / > R Settings
> Phone Calls > TTY > Use TTY
> On.
choose TTY
mode Press / > R Settings
> Phone Calls > TTY > Type
> TTY or VCO or HCO.
change the
TTY baud
rate Press / > R Settings
> Phone Calls > TTY > Baud
> 45.45 or 50.00.
change TTY
mode
during a call While in the TTY call, press
/ > In Call Setup > TTY > Type
> TTY or VCO or HCO.