Melnor Industries 1/4 Ton Capacity Hydraulic Lift Table 94822 - Manual

1/4-TON CAPACITY
HYDRAULIC
LIFT TABLE
94822 Hydraulic Lift Table
INsTRUCTIONs AND PRECAUTIONs
Visit our website at:
http://www.harborfreight.com
Read this material before
using this product.
Failure to do so can result
in serious injury.
sAVE THIs mANUAL.
When unpacking, make sure
that the product is intact and
undamaged.
If any parts are missing or broken,
please call 1‑800‑444‑3353
as soon as possible.
Copyright © 2010 by Harbor Freight Tools ® . All rights reserved. No
portion of this document or any artwork contained herein may be
reproduced in any shape or form without the express written consent
of Harbor Freight Tools. Diagrams within this document may not
be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools
required for assembly and service may not be included.
For technical questions or replacement
parts, please call 1-800-444-3353.
Specifications
Capacity: 500 Lbs. Maximum
Maximum Table Height:
27‑1/4”
Minimum Table Height 9”
Table Size 27‑3/4” x 17‑5/8”
Construction: Steel Construction
Table Length: 27‑ 3/4”
Weight
95.7 lbs.
Unpacking
Note: When unpacking, use assistance when lifting the Hydraulic
Lift Table from the box. Or set the packaging box sideways
and slide the Lift Table out from the box sideways.
Caution: When lifting Hydraulic Lift Table from packaging
box, be sure to grip the main frame. Do not just grip
the Table. Doing so will only raise up the Table and
keep the unit’s frame in the packaging box.
Important safety Information
1. Do not exceed 1/4 ton (500 lb.) max weight capacity.
Be aware of dynamic loading! Sudden load movement
may briefly create excess load causing product failure.
2. Use only on flat, level and hard surface capable of
supporting the Lift Table and any item(s) placed on
Table. Evenly distribute load on Table to avoid tipping.
3. Use as intended only. Do not use Lift Table to
lift or transport animals, pets, or people.
4. Assemble only according to these instructions.
Improper assembly can create hazards.
5. Follow all hydraulic bleeding instructions
specified in this manual.
6. Wear ANSI‑approved safety goggles and heavy‑
duty work gloves during assembly and use.
7. Keep assembly area clean and well lit.
8. Keep bystanders out of the area during assembly.
9. Do not assemble when tired or when under
the influence of drugs or medication.
10. This product is not a toy. Do not allow
children to play with or near this item.
11. Use as intended only.
12. Inspect before every use; do not use
if parts are loose or damaged.
13. Maintain product labels and nameplates. These carry
important safety information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
Manual Revised 11a