Moxi 3012 - Manual (Page 52)

Get Connected
52
Use the audio, video, and additional data storage ports available when
connecting your Moxi 3012
to the TV.
System specifications
The following table lists the specifications for the Moxi 3012.
Before connecting
Before installing, the Moxi 3012 installation environment must meet
the following physical requirements:
• Locate the Moxi 3012 within six feet of a power outlet.
• Do not use an extension cord, but rather use a power strip with
surge protection.
• Make sure the infra-red receiver on the Moxi 3012 and the
remote are free from obstructions, such as furniture and doors.
Table 2: Moxi 3012 specifications
Feature Quantifier
Model number HD DVR 3012
Power supply • Line input voltage 110 V to 125 VAC
• 1.6 amps
• Frequency 50 Hz to 60 Hz
USB power (front) One USB 2.0 connectors, 5 V, 500 mA
USB power (rear) One USB 2.0 connectors, 5 V, 500 mA
HDMI power 5 V, 55 mA
IEEE 1394 One large 4-pin
Operating temperature 0 degrees Celsius to 40 degrees Celsius
(32 Fahrenheit to 104 Fahrenheit) from
5% to 90% non-condensing relative
Do not operate the Moxi 3012 at
extreme hot or cold temperatures even
within this range. Doing so can result in
damage to the
Moxi 3012 and/or other
property and possibly personal injury.
Please refer to the Safety Information
for more instructions.
Dimensions (WxHxD) 17”W x 3.2”H x 12”D
Weight Approximately 10 pounds
Table 2: Moxi 3012 specifications (Continued)
Feature Quantifier