Mazda 2010 5 - Manual (Page 161)

Black plate (161,1)
Select the proper setting from the following chart.
Front seat Rear
seat
Load
Switch
Position Driver Passenger
Ч
― ― ―
0
Ч Ч
― ―
0
Ч Ч Ч ― 1
Ч Ч Ч Ч 2
Ч
― ―
Ч 3
Ч: Yes
―: No
qDaytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
Turn and Lane-Change
Signals
qTurn Signal
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Left turn
Right lane change
Left lane change
OFF
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
―until the
indicator flashes
― and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.
Driving Your Mazda
Switches and Controls
5-53
Mazda5_8AU7-EA-09H_Edition1 Page161
Wednesday, July 8 2009 11:27 AM
Form No.8AU7-EA-09H