Mazda 2010 5 - Manual (Page 311)

Black plate (311,1)
Reverse lights
Rear turn signal
lights
LED type
NOTE
The LED-type bulbs for the brake lights/
Taillights (Rear side-marker lights) cannot be
replaced by the customer. For bulb
replacement, consult an Authorized Mazda
Dealer.
6. Install the new bulb in the reverse order
of removal.
High-mount brake light
Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.
License plate lights
1. Make sure the ignition is switched off
and the headlight switch is off.
2. Remove the liftgate cover.
3. Pull the socket and bulb assembly and
remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
qReplacing Interior Light Bulbs
Overhead light/Map lights (Front)
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Maintenance and Care
Owner Maintenance
8-41
Mazda5_8AU7-EA-09H_Edition1 Page311
Wednesday, July 8 2009 11:30 AM
Form No.8AU7-EA-09H