Memorex MT3010OM - Manual (Page 15)

14
HDTV CONNECTION
COMPUTER CONNECTION
1. Connect the left and right audio cable from the HDTV’s Audio OUT jacks to the TV’s HDTV left and right Audio IN jacks.
2. Connect a video cable from the Y, Pb, Pr OUT jacks to the TV’s HDTV IN jacks.
3. Press the TV/VIDEO/PC button until Y Pb Pr appears on the TV screen.
From HDTV
OUT jacks
From HDTV
AUDIO OUT jacks
REAR OF TV
HDTV SET
TOP BOX
Video Cord
AUDIO/VIDEO Cord
To TV P R ,
P B ,Y IN jacks
To TV AUDIO
IN jacks
Follow the instructions below to connect an HDTV set top box to your television. (CABLES NOT INCLUDED.)
1. Connect the left and right audio cable from the computer’s Audio OUT jacks to the TV’s left and right VGAAUDIO IN jacks.
2. Connect a VGA cable from the computer’s VGA OUT jack to the TV’s VGA IN jack.
3. Press the TV/VIDEO/PC button until PC appears on the TV screen.
4. Refer to the computer’s owner’s manual for instructions.
COMPUTER
From AUDIO
OUT jacks
From VGA
OUT jack
To VGA
IN jack
To AUDIO
IN Jacks
REAR OF TV
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
When connected to a computer and
the unit is in the PC mode, you can
then adjust the following after
pressing the MENU button:
H position: Horizontal (left and right)
position on the screen.
V position: Vertical (up and down)
position on the screen.
Phase: Adjust the phase to get the
best picture.